2x2 Panel Light
bele-specsBela-T-bar Specification_ProfileBela-T-bar Specification_eng_v0Recess DIM

2×2 Drop-In

Benefits

  • Slim & simple design.
  • Dimming Control.
  • Reliably produces clear, bright illumination that reduces operational and maintenance costs.
  • Open rated for maximum air flow.
  • Junction temperature of LED light source is kept below 149°F(65°C). (Theoretically, in order for LED to get life span over 50,000 hours the junction temperature should be below 176°F (80°C)
  • Heat sources like transformer and FET of the SMPS are designed with heat dissipating mechanical structure to keep the temperature difference(ΔT) between inside lead and outside temperature not more than 86°F(30°C).
  • As commonly known, the air flows from cold to hot. The 2’x2’ LED Panel Light maximizes this natural convection at the level of fixture design utilizing optimal mechanical structure for vertically positioned LED module.
  • 50 Watts – 92% more efficient than comparable 90W (FL20Wx4 engagement) fluorescent lamps. Maintenance free operation lasts up to 16 times longer than fluorescent lighting.
  • Must be installed by a licensed electrician.

Request Information
Category: .

Technical Specifications

Model Name LP-PL-50W-4000K-DIM-REM
Housing Poly Carbonate, PMMA/Powder Coating
Beam Angle 120°
Voltage 100VAC~277VAC (2323) / AC100~240V (5252)
Power Factor ≥0.916
CCT 4000K (3500K, 5000K, 5700K, 6500K, RGB Optional)

PDF Spec Sheets

1

2×2 Panel Light